|
|
Post by Dan Penny on Jan 22, 2020 6:41:55 GMT
Hi I have an old Sams table which I did nothing with for years. Recently moved house and gave the table a recover and some love that it deserved. Does anyone know how to adjust the timer? It used to run for about 7 minutes now it's down to 3. Cant find anything on the web also from NZ not many tables out here. Thanks in advance.
Cheers Dan
|
|
|
|
Post by Chris_Sav on Jan 22, 2020 8:52:40 GMT
Are we talking a standard mechanical clock that you see on the front of most traditional bar billiards tables?
For the clock to run that short you have a problem, the clock cannot be adjusted by that much
Before looking at mechanical issues such as teeth jumping on the wheels, does the ticker arm (the little pendulum) have weights on it?
|
|
|
|
Post by Chris_Sav on Feb 16, 2020 10:23:31 GMT
Hope the OP found a solution, be nice to know  |
|
|
|
Post by Robert on Feb 23, 2022 11:25:41 GMT
Hello I have a bar billiards table and the timer circuit runs for a few seconds then stops.... its a supreme table with a straight 6 coin mech that activates the board any help os appreciated
|
|
|
|
Post by Chris_Sav on Feb 23, 2022 15:47:43 GMT
I doubt we will be of much help on the forum with Supreme timers. Almost all of our tables have traditional clockwork timers.
You might be lucky, I hope so!
Good luck!
|
|
|
|
Post by daveuk1 on Feb 23, 2022 20:22:57 GMT
Has this problem only just started?
If so it's worth checking the battery voltage, although it does sound like one of the timing capicitors may have given up.
If the problem has always been there then there is some adjustment on the timer
|
|
