|
Post by charliemonster on Mar 8, 2010 20:10:32 GMT
Hello all - I got a second hand table last autumn, which was working fine until Christmas. There is no maker's name on the table that I can see and I wouldn't describe it as 'antique' as it's only wood veneer. When you push the coin mechanism (which doesn't need coins) it is just 'dead' so the gate won't open or close. I have checked the fuse in the plug and the larger one inside the table and both appear fine, but nothing works. There is a black box with 4 little timer settings (on top) attached to the side with wires going to the gate via a fuse and to the coin mechanism via a round connection 'box'. I have taken some photos of the timer set-up but can't seem to attach them here - too large but could email if anyone thinks they can help. The table is kept in a large double garage which gets cold but not damp. Any advice of what to try, who to ask or where to buy replacement parts (if necessary) would be greatly appreciated. Cheers.
|
|
|
Post by Dunplaying on Mar 8, 2010 21:06:45 GMT
Hi. Is the gate solenoid controlled? is there any noise at all from any of the parts when you push the coin mechanism? Can you email pictures to me? You will find email address in my profile. Hopefully we can help. Dave.
|
|
|
Post by charliemonster on Mar 9, 2010 10:02:47 GMT
Thanks for the reply - I'm not sure about the solenoid but it doesn't make any noise when you turn it on/push in the coin mechanism, whereas previously there was a low humming noise when switched on - I'll email pictures.
|
|
|
Post by Q on Mar 9, 2010 12:29:46 GMT
|
|
|
Post by Dunplaying on Apr 21, 2010 23:23:14 GMT
Charliemonster's table is now working again. It appears to have been weather related. I think he had some condensation in the electrics!
|
|