|
Post by bayleaf on Aug 26, 2013 15:06:46 GMT
I have just checked the measurement of the cabinet and the top part...they are not the same size. I have made a big mess. The oak cabinet 63 x 27.75 inches.. C648. The top lower part is 70 x 32.5 I guess I also have the top part of a Sams wide table 38x73 inches I guess mahogany. I bought them as a job lot thinking I could refurb the cabinet and top..wrong I have to step back on this project now or keep collecting bits lol
Bayleaf
|
|
|
Post by bayleaf on Aug 26, 2013 14:04:05 GMT
Thanks for the help Tony & Tommo ( Clive ). Thanks for the dimensions .The cabinet I have the does not have the boxwood (the square section), sorry I didn't make myself clear...its both parts that are missing X 4. I will have to get some legs turned including the top section and screw thread. I guess its fitted into the cabinet by having it notched out around the cabinet box . That's why I need to look from the top. I saw part of it on someones photo on recovering. Its going to be a big job. I will put some photos up later.
Bayleaf
|
|
|
Post by bayleaf on Aug 24, 2013 20:26:16 GMT
Hi everyone, this is my first post. I hope its in the right slot. Can anyone help me on a restoration project. 5 years ago I sold my fully restored Oak Jelkes Bar Billiard Table..much to my regret. Anyway I have got my hand on an oak Jelkes cabinet without turned legs. Also the top frame and cracked slate What I need is one of you bright sparks in the know who can give me the dimensions on the leg length and the width of the top square part and if possible a top shot photo of the fitting inside the cabinet. Can anyone help please.
Thank
Bayleaf
|
|
|
Post by bayleaf on Aug 24, 2013 19:04:20 GMT
Hello everyone. My name is Bayleaf (Phil really ). I live in hants. Bit of an old scrote and missing my Oak Jelkes table that I sold ( I know, don't go there lol ) Anyway I want to join in, meet new folks and help me build an old table as well as meet up . The restoration might turn into a Frankenstein..but really don't want to do that. Ime thinking of setting up a website on this project to be helpful to everyone. Talent and experience on this subject seems to be limited on the general net that's why here seems to be the right place. I would like eventually to pull all this together. Views on this are welcomed. Ime thick skinned lol. I have a new thread on the first part of my problem. Photos will follow.
Thanks for the invite and looking forward to a chat
Bayleaf
|
|
|
Post by bayleaf on Aug 24, 2013 18:45:28 GMT
Sorry I think wrong section Hi everyone, this is my first post. I hope its in the right slot. Can anyone help me on a restoration project. 5 years ago I sold my fully restored Oak Jelkes Bar Billiard Table..much to my regret. Anyway I have got my hand on an oak Jelkes cabinet without turned legs. Also the top frame and cracked slate What I need is one of you bright sparks in the know who can give me the dimensions on the leg length and the width of the top square part and if possible a top shot photo of the fitting inside the cabinet. Can anyone help please.
Thank
Bayleaf
|
|