imb
Forum Beginner
Posts: 3
|
Post by imb on Mar 23, 2021 16:13:08 GMT
Hi I have a table with an electronic timer that is controlled with a chip marked Bar bill V1.2 and a 4 position DIP switch. I have searched the internet for information to no avail. I am hoping to be able to change the time from 8 minutes to approx 15. Has anyone any ideas what the settings on the DIP switch should be or knowledge of where the chip would have been manufactured? Any help would be appreciated Thanks Ian ![](https://storage.proboards.com/636886/thumbnailer/WVok0kKtjLyuRtcHNucW.png) Attachments:![](//storage.proboards.com/636886/thumbnailer/WVok0kKtjLyuRtcHNucW.png)
|
|
imb
Forum Beginner
Posts: 3
|
Post by imb on Mar 23, 2021 18:09:02 GMT
|
|